Synthetic Putting Greens in Fresno & Clovis

You want to practice your short game without driving to the course, and you want a green that actually rolls true in 105-degree Fresno summers. Longhorn Landscapes designs and installs custom synthetic putting greens for homeowners across Fresno, Clovis, Madera County, and Santa Clara County. We build greens that look natural in a Central Valley backyard, putt at consistent speeds year-round, and require almost zero maintenance. Whether you want a simple two-cup practice green or a multi-tier short-game area with fringe and a chipping pad, we’ll build it to fit your yard and your game.

What synthetic putting green installation involves

A quality backyard putting green is more than rolling out turf. The surface has to drain fast, sit flat where you want flat, hold its contours where you want break, and survive San Joaquin Valley sun without fading or wrinkling. We start by excavating 4 to 6 inches of soil, then build a compacted base of crushed aggregate that we grade to your desired contours — flat, sloped, tiered, or rolling. The base is the green; the turf just covers it.

On top of the base we install a nylon putting surface with a short, dense pile designed for true ball roll, typically in the 9–11 stimp range depending on the infill we specify. Cups are cut and set with regulation 4.25-inch cup liners and flags. Around the green we can add fringe turf in a longer pile for chipping, a synthetic chipping pad, bunker areas with white silica sand, paver borders, or LED landscape lighting for evening practice. Kiln-dried silica sand is brushed into the surface to support the fibers and dial in your green speed.

Why Longhorn Landscapes for synthetic putting greens

• Local Fresno & Clovis crews who understand Central Valley heat, clay-heavy soils, and what it takes to keep a base from settling under the sun.
• Custom contouring — we build breaks, tiers, and slopes the way you want them, not pre-fab kits rolled onto flat dirt.
• UV-stabilized nylon putting turf rated for high-sun climates, so colors stay consistent through Fresno summers.
• Regulation 4.25-inch cups, true ball roll, and adjustable green speed through infill depth.
• Licensed and insured.
• One crew handles the whole project — turf, masonry borders, lighting, and irrigation tie-ins — so you’re not coordinating four contractors.

Our synthetic putting green process

1. Free on-site consultation. We walk your yard, talk about how you practice, measure the space, and look at drainage, sun exposure, and sight lines.
2. Design and quote. You get a layout showing green shape, cup locations, fringe, and any add-ons like bunkers, chipping pads, or lighting, with a written estimate.
3. Excavation and grading. We dig out the existing soil, address drainage, and shape the subgrade.
4. Base build. Crushed aggregate goes in, gets compacted in lifts, and is laser-graded to your contours. This is where the green speed and break are actually built.
5. Turf installation. Putting surface is rolled, cut, seamed, and nailed. Fringe and chipping areas are installed and seamed in.
6. Cups, infill, and detailing. Cup liners and flags are set, silica sand is brushed in, and the surface is power-broomed to stand the fibers up.
7. Walkthrough. We roll putts with you, hand over a care sheet, and make any final adjustments before final payment.

What synthetic putting greens typically cost

Backyard putting green pricing in Fresno and Clovis depends on a few main factors: total square footage, how much contouring and break you want built into the base, the grade of putting turf, and any add-ons like fringe turf, chipping pads, sand bunkers, paver borders, LED lighting, or removing existing concrete, sod, or trees. A small flat practice green with one or two cups is on the lower end; a multi-tier green with chipping area, bunker, and lighting sits well above that.

Most of the cost is in the base build and labor, not the turf itself — which is why a properly installed green can last 15+ years with very little upkeep. We give honest, itemized estimates so you can see exactly what’s driving the price and decide what to include. Estimates are free and there’s no pressure. Call for a free on-site quote.

Service areas we cover

• Fresno
• Clovis
• Madera
• Sanger
• Selma
• Kerman
• Kingsburg
• San Jose and surrounding Santa Clara County
• Sunnyvale
• Los Gatos

FAQ

How long does a synthetic putting green last in Fresno’s heat?
A properly built green with UV-stabilized nylon turf and a compacted aggregate base will hold up 15 to 20 years in Central Valley sun. The base doesn’t degrade, and quality putting turf is engineered for high-UV climates.

How much maintenance does it really need?
Very little. Blow off leaves and debris, hose it down occasionally to rinse dust, and power-broom the surface once or twice a year to keep the fibers standing. No mowing, no watering, no fertilizer.

Can you build breaks and slopes, or is it just flat?
We build whatever you want — flat practice greens, single-break greens, multi-tier greens with elevation changes. The contours are shaped into the aggregate base before the turf goes down.

How fast does the green putt?
We can dial green speed roughly between 9 and 11 on the stimpmeter by adjusting infill depth and turf selection. Tell us what speed you want and we’ll build to it.

Can I chip onto it?
Yes. We recommend adding a fringe collar in longer pile turf and, if you want to hit full chips and pitches, a dedicated chipping pad off the green so you’re not denting the putting surface.

How long does installation take?
Most residential greens take 3 to 7 working days from excavation to first putt, depending on size and add-ons like bunkers, lighting, or masonry borders.

Ready to stop driving to the course every time you want to roll some putts? Longhorn Landscapes will design and build a synthetic putting green that fits your yard, your game, and the Central Valley climate. Call (559) 826-9545 for a free on-site consultation and quote in Fresno, Clovis, or anywhere in our service area.