Masonry & Stonework in Clovis, CA

Cracked block wall along the driveway? Want a stacked-stone veneer on that plain stucco planter, or a real stone seat wall wrapping the patio? Longhorn Landscapes builds custom masonry and stonework for homeowners across Clovis, Fresno, and the surrounding Central Valley. From structural retaining walls that hold back a sloped yard to decorative flagstone and natural stone accents, we do the hands-on work ourselves — no subcontracted crews, no guessing. If you want masonry that looks right and stays put through Valley summers and winter rains, you’re in the right place.

What masonry and stonework involves

Masonry is the craft of building with stone, brick, block, and mortar. On a residential property in Clovis, that usually means one of a few things: a retaining wall to reclaim usable yard on a slope, a seat wall or planter wall to define a patio, stone veneer wrapped around a house foundation or pilaster, a stacked-stone fireplace or fire pit surround, or an outdoor kitchen island faced in stone or brick.

The work starts with a proper footing — usually a poured concrete foundation dug below grade so nothing shifts. From there we lay CMU block, natural stone, or manufactured stone veneer with the right mortar mix for the application. Retaining walls need drainage gravel, filter fabric, and weep holes behind them so hydrostatic pressure doesn’t blow them out after a wet winter. Veneer work needs a proper scratch coat and metal lath on stucco or wood substrates. We use materials from suppliers like Eldorado Stone, Coronado Stone, and locally sourced California fieldstone and flagstone. Done right, masonry is one of the longest-lasting improvements you can put on a property — decades, not years.

Why Longhorn Landscapes for masonry and stonework

• Local Fresno and Clovis crew — we know Central Valley soils, expansion, and how heat cycles affect mortar joints
• Masonry built into full landscape projects so walls tie into patios, drainage, and irrigation properly
• Real footings and drainage on every wall — no dry-stacked shortcuts on structural work
• Materials from established suppliers: Eldorado Stone, Coronado Stone, Belgard, and natural California stone yards
• We handle permits and engineered plans when a wall crosses the height threshold that requires them
• Straightforward quotes with the scope, materials, and timeline in writing before we start

Our masonry and stonework process

1. Site visit and measure. We walk the property, look at grade, drainage, and access, and talk through what you want the finished space to do.
2. Design and material selection. We show you stone and block samples, sketch the layout, and confirm heights, footprints, and any tie-ins to existing patios or planters.
3. Written estimate. Line-item pricing with materials specified. If the project needs a permit or engineered drawings, we tell you up front.
4. Excavation and footings. We dig to the required depth, form and pour concrete footings, and let them cure before laying block or stone.
5. Build. Block or stone goes in course by course. Drainage gravel, weep holes, and rebar where the plan calls for it. Veneer, caps, and mortar joints finished clean.
6. Backfill, cleanup, and grade. We backfill against walls properly, restore grade, and haul off spoils and debris.
7. Walk-through. We show you what we built, how to care for it, and answer any questions before final payment.

What masonry and stonework typically costs

Masonry pricing varies more than most landscape work because so much depends on the specifics. Estimates range based on wall height and length, whether the wall is structural or decorative, material choice (manufactured veneer runs less than natural stone), site access for equipment, excavation depth, and whether engineered drawings or permits are required. A short seat wall around a patio is a very different job than a six-foot engineered retaining wall holding back a hillside.

What’s typically included: excavation, footings, block or stone, mortar, drainage, caps, and cleanup. What’s usually separate: permits, engineered stamps for tall walls, and any electrical or gas rough-ins if the masonry is part of an outdoor kitchen or fire feature. We give you a free on-site quote with everything itemized so there are no surprises.

Service areas we cover

• Clovis
• Fresno
• Old Town Clovis and Harlan Ranch
• Tarpey Village
• Madera and Madera County
• Sanger
• Kingsburg
• Selma
• Santa Clara County

Frequently asked questions

Do I need a permit for a retaining wall in Clovis?
Generally, walls over four feet tall (measured from the bottom of the footing) or walls supporting a surcharge like a driveway require a permit and engineered plans. We handle that paperwork when it applies.

What’s the difference between natural stone and manufactured stone veneer?
Natural stone is quarried rock — heavier, more variation, higher cost, and it lasts indefinitely. Manufactured veneer is colored concrete cast in stone molds. It’s lighter, easier to install on vertical surfaces, and costs less. Both look great when installed correctly.

How long does a masonry project take?
A simple seat wall or planter can be done in a few days. A larger retaining wall or a stone-veneered outdoor kitchen typically runs one to three weeks depending on scope, weather, and cure times.

Will a stone wall crack in Central Valley heat?
Not if it’s built with a proper footing, the right mortar mix, and expansion considered on longer runs. The cracks you see on older walls usually trace back to skipped footings or drainage problems, not the stone itself.

Can you match existing stone or brick on my house?
Most of the time, yes. We’ll bring you samples that match your existing veneer or masonry, or blend a mix to get close. On older homes with discontinued materials, we’ll show you the closest current options.

Do you build outdoor fireplaces and fire pits too?
Yes. Stone or brick fire pits, fireplaces, pizza ovens, and outdoor kitchen islands are all part of what we do — often combined with a paver patio and landscape lighting in the same project.

Ready to get a real number on your masonry project? Call Longhorn Landscapes at (559) 826-9545 or request a free on-site quote. We’ll come out, measure, talk through materials, and give you a written estimate for masonry and stonework anywhere in Clovis, Fresno, or the surrounding Central Valley.