Landscape LED Lighting in Clovis, CA

Your yard looks great during the day — then the sun drops behind the Sierra foothills and the whole property disappears. A well-designed landscape LED lighting system fixes that. Longhorn Landscapes designs and installs low-voltage LED lighting for homes throughout Clovis, Fresno, and the surrounding Central Valley. We light the features you spent good money on: the paver patio, the pergola, the mature oaks, the front elevation. Practical, layered, and built to hold up to San Joaquin Valley summers. Get it done once and get it done right.

What landscape LED lighting involves

A landscape lighting system is more than sticking a few path lights in the dirt. We start by walking your property after dark to see what actually needs lighting — the front entry for safety, the walkways for footing, the trees and architectural features for curb appeal, and the patio and outdoor kitchen for usable evening space.

The system runs on 12-volt low-voltage wiring powered by a transformer wired into a standard 120V exterior outlet. Because it’s low voltage, it’s safe to run near planting beds, turf, and water features, and it can be adjusted or expanded over time. We use solid brass and copper fixtures where they’ll last longest, and quality composite fixtures where they make sense. LED lamps typically pull 3–7 watts each, run 40,000+ hours, and stay cool to the touch.

A typical Clovis job includes path lights along walkways, well lights or bullet uplights on trees and the home’s facade, hardscape lights tucked under retaining wall caps or paver steps, downlighting from eaves or trees for moonlight effect, and a timer or smart controller so the whole thing runs itself.

Why Longhorn Landscapes for landscape LED lighting

• Full-service landscape contractor — we understand how lighting integrates with pavers, turf, irrigation, and pergolas because we build all of it.
• Low-voltage LED systems designed to handle Central Valley heat, dust, and hard water without premature fixture failure.
• Warm-white LED lamps (2700K–3000K) as our default — no harsh blue-white glare washing out your landscaping.
• Buried wire runs and hidden fixtures — you see the light, not the hardware.
• Smart timers and photocell/astronomic controls so the system turns on at dusk and off on your schedule automatically.
• Experienced team with clean job sites and straight answers on scope and cost.

Our landscape LED lighting process

1. On-site consultation. We walk your Clovis or Fresno property with you, learn what you want lit, and note power sources, existing hardscape, and plantings.
2. Nighttime demo (larger projects). For bigger designs, we’ll bring demo fixtures out after dark so you can actually see the effect on your trees and facade before committing.
3. Design and quote. You get a written proposal listing fixture counts, fixture types, transformer size, controller, and total cost — no vague line items.
4. Installation. We trench or tuck low-voltage wire below grade, mount the transformer, set fixtures, and aim each one at night for the right effect.
5. Programming and walkthrough. We set the timer, show you how to adjust it, and walk the yard with you once it’s dark to confirm every fixture is doing its job.
6. Follow-up. We check back after the first few weeks to re-aim anything that’s shifted and answer questions.

What landscape LED lighting typically costs

Landscape lighting cost depends on how many fixtures you need, the fixture grade, transformer size, wire runs, and whether we’re working with an existing landscape or a fresh install. A small front-yard package with a handful of path lights and two or three uplights is a very different project from a full property with tree downlighting, hardscape lights under a paver patio, and a smart controller.

Estimates range based on fixture count, brass vs. composite fixtures, trenching complexity, and controller type. Every quote includes the transformer, fixtures, LED lamps, low-voltage wire, buried installation, and timer setup. Repairs on existing systems, adding fixtures to a system we didn’t install, and integrating lighting with a new patio or pergola build are all things we handle. Contact us for a free on-site quote and we’ll give you real numbers for your property.

Service areas we cover

• Clovis, CA
• Fresno, CA
• Old Fig Garden
• Woodward Park
• Tarpey Village
• Madera
• Madera Ranchos
• Sanger
• Kerman
• Santa Clara County (select projects)

FAQ

How long do LED landscape lights last?
Quality LED lamps rated for 40,000+ hours typically run 15–20 years on a dusk-to-dawn schedule before you notice dimming. Brass fixture housings will outlast that easily.

Will landscape lighting run up my power bill?
No. A typical residential system with 15–25 LED fixtures pulls less power than a single old halogen floodlight. Most Clovis homeowners see only a few dollars per month on their PG&E bill.

Can you add lighting to my existing patio or pergola?
Yes. We retrofit lighting into existing paver patios, concrete patios, pergolas, and retaining walls all the time. If we can find a discreet path for the wire, we can add fixtures.

Do the lights work automatically?
Yes. We install a timer or smart controller that turns the system on at dusk and off at whatever hour you choose. No wall switches to flip.

What color is the light — warm or bright white?
We default to warm white (2700K–3000K), which is closer to a soft incandescent glow. It’s flattering on stucco, wood, and mature trees. We can go cooler if you specifically want it for a modern look.

Can lighting be added when you build a new landscape?
Absolutely — and it’s the smartest time to do it. Wire runs are easier before turf, pavers, and planting go in, and we can hide fixtures inside hardscape from day one.

Ready to see your Clovis or Fresno property come to life after dark? Call Longhorn Landscapes at (559) 826-9545 for a free on-site consultation and quote on your landscape LED lighting project. We’ll walk the yard, listen to what you want, and put together an honest plan.